Type MCS 8
Fully welded steel container
- L x W x H in mm approx.: 2,438 x 2,200 x 2,250
- 2 ventilation openings, 300 x 500 mm, frame made of sturdy square tube with fixed slats / fly screen (after calculation of the required ventilation of a battery room in accordance with DIN EN IEC 62485-2 VDE0510-485-2:2019-04
- Personnel door approx. 1,000 x 2,000 mm, with rain strip, seal, lever handle set, profile cylinder lock
- Electrical installation 400 V: Electrical input 400 V 32 A, RCD, 1 light switch, 10 sockets 230 V 16 A (evenly distributed over shelves, 1 socket next to light switch), 5 fuses, 1 linear luminaire
- 1 sturdy fixed heavy-duty shelf with 1 shelf, load capacity up to 300 kg / shelf
- 1 welded-on plate, 3 mm thick, for holding up to 10 Stecamat chargers for lead-acid batteries
- Container primed inside / outside (KTL dip coating), painted inside / outside (powder coating), unit price free domicile
- Optionally climate insulated
Type MCS 10
Fully welded steel container
- L x W x H in mm approx.: 2,991 x 2,438 x 2,591
- 2 ventilation openings, 300 x 500 mm, frame made of sturdy square tube with fixed slats / fly screen (after calculation of the required ventilation of a battery room according to DIN EN IEC 62485-2 VDE0510-485-2: 2019-04)
- Personnel door approx. 1,000 x 2,000 mm, with rain strip, seal, lever handle set, profile cylinder lock
- Electrical installation 400 V: Electrical input 400 V 32 A, RCD, 1 light switch, 21 sockets 230 V 16 A (7 + 13 evenly distributed over shelves, 1 socket next to light switch), 8 fuses, 1 linear luminaire
- 2 stable fixed heavy-duty shelves with 1 shelf, load capacity up to 300 kg / shelf
- 2 welded-on plates, 3 mm thick, for holding up to 20 Stecamat chargers for lead-acid batteries
- Container primed inside / outside (KTL dip coating), painted inside / outside (powder coating), unit price free domicile
- Optionally climate insulated
Stecamat 861
Processor-controlled charger for lead batteries
The Stecamat 861 battery charger is available in a dust and water jet-proof housing. Your battery is charged gently and quickly thanks to the processor-controlled charging process. In order to individually adjust the current, voltage, time and ideal monitoring of your battery, the Stecamat 861 battery charger offers a selection of pre-programmed battery charging characteristics as well as the option of entering your own characteristics. This means that even pre-damaged or deeply discharged batteries can be treated to ensure a long service life with the Stecamat 861. A backlit display gives you quick information about the charging status.
The extensive equipment ensures maximum flexibility in use. This and the simple operation ensure smooth operation.
- In addition to fixed charging characteristics, it is also possible to enter your own characteristic curve
- Housing protected against water jets IP 65
- Half the charging time compared to simple, unregulated chargers with the same rated current
- Ideal for charging batteries with liquid electrolytes and fixed gel / fleece electrolytes (AGM)
- Adjustable nominal capacity determines the charging current
- Suitable for deeply discharged batteries
- Battery always ready for use thanks to integrated charge retention
- Charge below the gassing voltage
- Optimum charging of pre-damaged batteries
- Potential-free contact for fan control of battery room ventilation
- Customized programming on request
Stecamat 861 ES
Processor-controlled charger/discharger for lead batteries
The Stecamat 861 ES battery charger is equipped with a discharge stage of 140 W. It can recharge 12 V batteries with an output of 720 W or discharge, charge and evaluate the battery in an automated test cycle.
To customize the current, voltage, time and ideal monitoring of your battery, the Stecamat 861 ES battery charger offers both a selection of pre-programmed battery charging characteristics and the option of entering your own characteristics. This means that even pre-damaged or deeply discharged batteries can be treated to ensure a long service life with the Stecamat 861 ES. A backlit display gives you quick information about the charging status.
The extensive equipment and solutions tailored to your application ensure maximum flexibility in use. This and the simple operation ensure smooth operation.
- Housing protected against water jets IP 65
- Battery treatment of wet, gel and AGM batteries possible
- Charging 12 V lead-acid batteries (maximum 50 A)
- Adjustable nominal capacity determines the maximum charging current
- Charge below the gassing voltage
- Contains 2 predefined and 4 freely programmable charging curves
- Automated testing of 12 V lead-acid batteries (charging - discharging - charging)
- 12 V discharge stage with 10 A discharge current (selectable 2.5 A - 5 A - 10 A)
- Determining the capacity of a 12 V lead-acid battery
- Suitable for treating deeply discharged batteries
- Potential-free contact for fan control of battery room ventilation
